SH-500CA
Shovelhead 1970-78
Got HP? If so, you’re going to want to get your hands on one of the new SH-500 DRIVE systems by Belt Drives, Ltd. The latest in a long line of trend setting drives, the 500 SERIES offers enthusiasts a number of significant advantages over other aftermarket and stock systems. First, BDL’s reinforced 2” belt was developed specifically to handle the high torque and horsepower numbers being produced by today’s big inch V-Twin engines. Additionally the system incorporates a bullet proof, one-piece billet motor plate and unique side guard and starter gear cover. Every 500 kit includes the very latest in clutch technology with BDL’s own patented BALL BEARING CLUTCH. The state of the art design offers up to 30% more contact surface, reduced lever pull, smother transition, super quiet operation and flawless clutch engagement. Instead of a 5 in a 4 shovel, our special gear ratio allows the 4 speed to come of the line with power and affords great highway performance and mileage.
Available in Polished, Black and Clear Anodized (shown above) finishes.
Click on tab to view parts list.
| DESCRIPTION | PART NO. | |
| A | Rear Basket 69 Tooth 2 inch (breakdown below) | 69-EV2 |
| B | 52 Tooth 2 Inch Front Pulley (breakdown below) | EV-52 |
| C | 2” HTD Rubber Belt 142 Tooth | BDL-142-2 |
| D | Clutch Hub | EV-190 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Patented Ball Bearing Pressure Plate | BPP-100 |
| H | Adjusting Screw & Nut | CDAS-200 |
| L | Hardware Kit | SH-500HK |
| M | Motor Plate (Clear Anodize) |
SH-500MPCA |
| MB | Motor Plate Bearing | MPB-10 |
| N | Starter Housing | SH-EV-SHCA |
| O | Side Plate for SH-500 (Clear Anodize) |
SG-EV-500CA |
| P | Rear Dome Cover with Chrome Screws | EVRC-500CA |
| Q | Starter Pinion Gear | PG-100 |
| R | Standoffs (Clear Anodize) |
SO-500CA |
| S | Starter Housing Spacer (Clear Anodize) |
SH-500SSOCA |
| T | Starter Gear Guard (Clear Anodize) |
SGC-SCA |
69-EV-2
| DESCRIPTION | PART NO. | |
| A | Rear Basket (includes all parts below when ordering 69-EV2) | 69-EV2 |
| A1 | Starter ring Gear | SG-3 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
EV-190
| DESCRIPTION | PART NO. | |
| D | Shallow Taper Hub 1979-84 | EV-190 |
| D1 | C-Clip for Backside of Hub | CC-158 |
EV-52
| DESCRIPTION | PART NO. | |
| B | Front Pulley 52 Tooth 2" | EV-52 |
| B1 | 1/2" Offset Insert | IN-500 |
BPP-100 Ball Bearing Pressure Plate Kit
| DESCRIPTION | PART NO. | |
| A | Patented Ball Bearing Pressure Plate | BPP-100 |
| B | Set of 32-3/8" Ball Bearings | SS-SBB |
| C | Diaphragm Spring | DES-100 |
| D | Spring Retainer | DCS-100 |
| E | 4 each 3/8" x 3/4" Shoulder Bolts | SSB-4 |
 |
 |