Belt Drives Ltd - Supplement to install EVO-900

1. Support motorcycle and secure it.
2. Disconnect battery

3. Remove primary cover

4. Remove existing sprocket or compensator & 1/8" spacer. Refer to Harley manual from removal.

5. Place teflon spacer, with the larger ID, on compensator lead flange and apply grease to threads.

6. Apply grease to threads on compensator sprocket.

7. Screw compensator lead flange into compensator sprocket on counterbored side of sprocket.

8. Apply grease to flat side of compensator sprocket.

9. Install sprocket and chain onto engine shaft.

10. Apply grease to 2nd teflon spacer and place it on sprocket assembly.

11. Place compensator nut flange on assembly and install engine nut. Torque nut to Harley specifications.

On Softail models 1986-1999 remove the stock .200" spacer and use the .125 spacer supplied in kit, behind compensator for correct spacing.

CS-25A	Complete Assembly 25 tooth
CS-24A	Complete Assembly 24 tooth

PATENT # US 6,234,909 B1