EVO-9TF
BDL’s EVO-9TF is the work horse of belt
drives. With over 50,000 kits running on
bikes today you can be reassured this
drive can outlast and out perform the
competition. Our one-piece 6061-T6
polished billet motor plate locks the
tranny and engine together. All of these
kits include a 3” wide belt drive unit
with polished pressure plate, double row
sealed mainshaft bearing, polished
aluminum side plate and pulley covers
and a complete
"Competitor Clutch" with Kevlar®
plates. For installation in wide frame/
tire applications, choose the appropriate insert. Kits are available with an optional oil
filter mount centered in the motor plate.
The kit allows the oil lines to be hidden
out of the way
to space the front pulley.
For Softail® Models from 1986 to 1989.
EVO-9TF Parts Kit
PARTS KIT
| |
DESCRIPTION |
PART NO. |
| A |
Rear Basket (breakdown below) |
72-3E |
| B |
47 Tooth Front Pulley (breakdown below) |
47-OFP |
| C |
3" HTD Rubber Belt |
BDL-141-3 |
| D |
Shallow Taper Hub 86-89 |
EV-175 |
| E |
Complete Clutch Kit (inc. fibers and steels) |
ERCPS-100 |
| F |
Spring Pressure Plate |
EPP-100 |
| G |
Hub Nut with Seal |
HNS-100 |
| H |
Adjusting Screw and Nut |
CDAS-100 |
| I |
Shoulder Bolts Set of 9 |
ESB-100 |
| J |
Coil Springs Set of 9 |
ECS-100 |
| K |
Front Pulley Nut & Washer |
FHN-2, WA-3 |
| L |
Hardware Kit for EVO-9S |
HK-9 |
| M |
Softail Motor Plate w/Oil Filter Relocation Kit |
BDL-900F |
| MB |
Motor Plate Bearing |
MPB-9 |
| N |
Starter Housing |
SH-9A |
| O |
Side Plate |
SP-9 |
| P |
Dome Covers |
MD-100 |
| Q |
Starter Pinion Gear |
PG-100 |
| R |
Oil Filter (Fram Filter PH6022) |
N/A |
Hub
EV-175 HUB
| |
DESCRIPTION |
PART NO. |
| D |
Inner Hub (parts below included w/EV-175) |
EV-175 |
| D1 |
C-Clip for Backside of Hub |
CC-158 |
Rear Basket
72-3E Rear Basket
| |
DESCRIPTION |
PART NO. |
| A |
Rear Basket (includes all parts below when ordering 72-3E) |
72-3E |
| A1 |
Starter ring Gear |
SG-2 |
| A2 |
Drive Dogs (set of 12) |
EVRD-1 |
| A3 |
Hub Bearing |
EHB-100 |
| A4 |
C-Clip for hub bearing |
CC-244 |
Front Pulley and Insert
47-OFP Front Pulley and Insert
| |
DESCRIPTION |
BDL PART NO. |
| B |
Front Pulley 47 Tooth 3" |
47-OFP |
| B1 |
Standard Insert (hardware included) |
IN-STD |
