EVO-9T

evo-9t BDL’s EVO-9T is the work horse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and out perform the competition. Our one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. All of these kits include a 3” wide belt drive unit with polished pressure plate, double row sealed mainshaft bearing, polished aluminum side plate and pulley covers and a complete "Competitor Clutch" with Kevlar® plates. For installation in wide frame/ tire applications, choose the appropriate insert. Kits are available with an optional oil filter mount centered in the motor plate. The kit allows the oil lines to be hidden out of the way to space the front pulley. For Softail® Models from 1986 to 1989.

EVO-9T Parts Kit

	DECRIPTION	PART NO.
A	Rear Basket (Break Down Below)	72-3E
B	47 Tooth Front Pulley (Break Down Below	47-OFP
C	3" HTD Rubber Belt	BDL-141-3
D	Shallow Taper Hub (see breakdown below)	EV-175
E	Complete Clutch Kit (inc. fibers and steels)	ERCPS-100
F	Spring Pressure Plate	EPP-100
G	Hub Nut with Seal	HNS-100
H	Adjusting Screw and Nut	CDAS-100
I	Shoulder Bolts Set of 9	ESB-100
J	Coil Springs	ECS-100
K	Front Pulley Nut & Washer	FHN-2, WA-3
L	Hardware Kit for EVO-9S	HK-9
M	Softail Motor Plate	MP-9
MB	Motor Plate Bearing	MPB-9
N	Starter Housing	SH-9A
O	Side Plate	SP-9
P	Dome Covers	MD-100
Q	Starter Pinion Gear	PG-100

Hub

EV-175 HUB

ev-170

	DESCRIPTION	PART NO.
D	Inner Hub (parts below included w/EV-175)	EV-175
D1	C-Clip for Backside of Hub	CC-158

Rear Basket

72-3E Rear Basket

72-3e

	DESCRIPTION	PART NO.
A	Rear Basket (includes all parts below when ordering 72-3E)	72-3E
A1	Starter ring Gear	SG-2
A2	Drive Dogs (set of 12)	EVRD-1
A3	Hub Bearing	EHB-100
A4	C-Clip for hub bearing	CC-244

Front Pulley and Insert

47-OFP Front Pulley and Insert

47-OFP

	DESCRIPTION	PART NO.
B	Front Pulley 47 Tooth 3"	47-OFP
B1	Standard Insert (hardware included)	IN-STD