EVO-9SF

evo-9s BDL’s
EVO-9SF is the work horse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and out perform the competition. Our one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. All of these kits include a 3” wide belt drive unit with polished pressure plate, double row sealed mainshaft bearing, polished aluminum side plate and pulley covers and a complete "Competitor Clutch" with Kevlar® plates. For installation in wide frame/ tire applications, choose the appropriate insert. Kits come with an oil filter mount centered in the motor plate. The kit allows the oil lines to be hidden out of the way. For Softail® models from 1990 to 2006.

Click on tab to view parts list.

EVO-9SF DRIVE KIT

	DESCRIPTION	PART NO.
A	Rear Basket (breakdown below)	72-3E
B	47 Tooth Front Pulley (breakdown below)	47-OFP
C	3" HTD Rubber Belt	BDL-141-3
D	Clutch Hub	EV-180
E	Complete Clutch Kit (inc. fibers and steels)	ERCPS-100
F	Spring Pressure Plate	EPP-100
G	Hub Nut with Seal	HNS-100
H	Adjusting Screw and Nut	CDAS-100
I	Shoulder Bolts Set of 9	ESB-100
J	Coil Springs Set of 9	ECS-100
K	Front Pulley Nut & Washer	FHN-2, WA-3
L	Hardware Kit for EVO-9S	HK-9
M	Softail Motor Plate w/Oil Filter Relocation Kit	BDL-900-F
MB	Motor Plate Bearing	MPB-9
N	Starter Housing	SH-9A
O	Side Plate	SP-9
P	Dome Covers	MD-100
Q	Starter Pinion Gear	PG-100
R	Oil Filter (Fram Filter PH6022)	N/A

HUB

EV-180

	DESCRIPTION	PART NO.
D	Inner Hub (parts below included with EV-180)	EV-180
D1	Step Washer & Screws	ESW-1
D2	C-Clip for Backside of Hub	CC-158

FRONT PULLEY AND INSERT

47-OFP

	DESCRIPTION	PART NO.
B	Front Pulley 47 Tooth 3	47-OFP
B1	Standard Insert (hardware included)	IN-STD

REAR BASKET

72-3E

	DESCRIPTION	PART NO.
A	Rear Basket (includes all parts below when ordering 72-3E)	72-3E
A1	Starter ring Gear	SG-2
A2	Drive Dogs (set of 12)	EVRD-1
A3	Hub Bearing	EHB-100
A4	C-Clip for hub bearing	CC-244