EVO-9S
BDL’s EVO-9S is the work horse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and out perform the competition. Our one-piece 6061-T6 polished billet motor plate locks the trans and engine together. All of these kits include a 3” wide belt drive unit with polished pressure plate, double row sealed mainshaft bearing, polished aluminum side plate and pulley covers and a complete “BDL Clutch" with Kevlar® plates. For installation in wide frame/tire applications, choose the appropriate insert. For Softail® Models from 1990 to 2006.
PARTS KIT
| ID | DESCRIPTION | PART NO. |
| A | Rear Basket (breakdown below) | 72-3E |
| B | 47 Tooth Front Pulley (breakdown below) | 47-OFP |
| C | 3" HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (inc. fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| G | Hub Nut with Seal | HNS-100 |
| H | Adjusting Screw and Nut | CDAS-100 |
| I | Shoulder Bolts Set of 9 | ESB-100 |
| J | Coil Springs | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware kit for EVO-9S | HK-9 |
| M | Softail Motor Plate | MP-9 |
| N | Starter Housing | SH-9A |
| O | Side Plate | SP-9 |
| P | Dome Covers | MD-100 |
| Q | Starter Pinion Gear | PG-100 |
72-3E REAR BASKET
| DESCRIPTION | BDL PART NO. | |
| A | Rear Basket (includes all parts below when ordering 72-3E) | 72-3E |
| A1 | Starter ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |
EV-180 HUB
DESCRIPTION |
BDL PART NO. |
|
D |
Inner Hub (parts below included with EV-180) |
EV-180 |
D1 |
Step Washer & Screws |
ESW-1 |
D2 |
C-Clip for Backside of Hub |
CC-158 |
47-OFP FRONT PULLEY AND INSERT
| DESCRIPTION | BDL PART NO. | |
| B | Front Pulley 47 Tooth 3 | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
 |
 |