EVO-950
Our EVO-950 is the drive for people that would like the strength and reliability of an out board bearing support. This drive was designed with the same ideas of our Top Fuel Street drive the TF-2000. This drive has all the components of the EVO–9S but with a strong billet outer bearing support to help minimize flex in the motor plate for high horse power motors. Fits 1990-2006 Softails®.
EVO-950 Drive Kit
| DESCRIPTION | PART NO. | |
| A | Rear Basket (breakdown below) | 72-3EX |
| B | 47 Tooth Front Pulley (breakdown below) | 47-OFP |
| C | 3 HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Ball Bearing Pressure Plate | BPP-100 |
| G | Hub Nut | EVHN-500 |
| H | Adjusting Screw & Nut | AS-500 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware Kit for EVO-9S | HK-9 |
| M | Softail Motor Plate | MP-9 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | SH-9A |
| O | Bearing Support plate for EVO-950 | EVO-901SP |
| Q | Starter Pinion gear | PG-100 |
| R | Standoffs for EVO-3001 | EVO-901SO |
| S | Front pulley cover for EVO-3000 | EVO-3000FC |
| T | Rear clutch cover for EVO-300 | EVO-3000RC |
| U | Bearing covers (sold in set of 2) | EVO-3000BC |
| V | Sealed bearing (only one needed) | EVO-3000SB |
Hub
Rear Basket
72-3EX REAR BASKET
| DESCRIPTION | PART NO. | |
| A | Rear Basket (includes all parts below when ordering 72-3EX) | 72-3EX |
| A1 | Starter ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |
Front Pulley
47-OFP
| DESCRIPTION | PART NO. | |
| B | Front Pulley 47 Tooth 3 | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
 |
 |