EVO-900SF
Our EVO-900SF is the drive for people that would like the comfort and reliability of an outboard bearing support. This drive was designed with the same ideas of our Top Fuel Street drive the TF-2000. This drive has all the components of the EVO–9S but with a strong billet outer bearing support to help minimize flex in the motor plate for high horsepower motors. This drive also includes our oil filter relocation kit so you can clean up the look of your bike by hiding your filter and oil lines on and behind our belt drive. Fits 1990-2006 Softail®
Parts Kit
| Description | BDL Part No. | |
|---|---|---|
| A | Motor Plate for EVO Drives 1990-2006 w/ oil filter kit | MP-9F |
| B | 3" 141 tooth rubber HTD Belt | BDL-141-3 |
| C | Front pulley cover for EVP-3000 kit | EVO-3000FC |
| D | Front and rear bearing covers | EVO-3000BC |
| E | Nut for Front pulley | FHN-2 |
| F | Bearing support plate for EVO-300 | EVO-3000SP |
| G | Sealed bearing (only one needed) | EVO-3000SB |
| H | Standoffs for EVO-3000 | EVO-3000SO |
| I | Pressure plate for EVO-300 w/ shoulder bolt and springs | EVO-3000PP |
| J | Adjusting screw | CDAS-100 |
| K | Hub nut w/ Seal | HNS-100 |
| L | Pinion gear | PG-100 |
| M | Rear clutch hub cover | EVO-3000RC |
| N | Complete Clutch kit used for all BDL belt drives | ERCPS-100 |
| O | Starter Housing (polished) | SH-9 |
| P | Hardware kit for EVO-9S | HK-9 |
EV-180 |
|||
|---|---|---|---|
 |
A | Splined Hub | EV-180 |
| B | Hub Washer | ESW-1 | |
| C | C-clip for backside of hub | CC-158 | |
72-3EX 72 Tooth Basket, Gear, Dogs & Bearing |
|||
|---|---|---|---|
 |
A | Ring gear for 1990-2006 drives | SG-2 |
| B | Rear Basket 72 tooth 3” rear basket for EVO-3000 | 72-3EX |
|
| C | Drive dogs | EVRD-1 | |
| D | C-clip for hub bearing | CC-244 | |
| E | Hub bearing | EHB-100 | |
Front Pulley Insert |
|||
|---|---|---|---|
 |
A | 3" 47 tooth front pulley for Softail | 47-OFP |
| B | Standard insert | IN-STD | |