EVO-900S
Our EVO-900S is the drive for people that would like the strength and reliability of an outboard bearing support. This drive was designed with the same ideas of our Top Fuel Street drive the TF-2000. This drive has all the components of the EVO-9S but with a strong billet outer bearing support to help minimize flex in the motor plate for high horsepower motors. This drive fits 1990-2006 Softail® models.
Click tab to view parts list.
EVO-900S Parts Kit
| DESCRIPTION | PART NO. | |
| A | Rear Basket (breakdown below) | 72-3EX |
| B | 47 Tooth Front Pulley (breakdown below) | 47-OFP |
| C | 3" HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (inc. fibers and steels) | ERCPS-100 |
| F | Pressure Plate for EVO-3000 w/Springs & Shouder Bolts | EVO-3000PP |
| G | Hub Nut with Seal | HNS-100 |
| H | Adjusting Screw and Nut | CDAS-100 |
| I | Shoulder Bolts Set of 9 | CDSB-100 |
| J | Coil Springs Set of 9 | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware Kit for EVO-9S | HK-9 |
| M | Softail Motor Plate | MP-9 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | SH-9A |
| O | Bearing Support Plate for EVO-3000 | EVO-3000SP |
| Q | Starter Pinion Gear | PG-100 |
| R | Standoffs for EVO-3000 | EVO-3000SO |
| S | Front Pulley Cover for EVO-3000 | EVO-3000FC |
| T | Rear Clutch Cover for EVO-3000 | EVO-3000RC |
| U | Bearing Covers (sold in set of 2) | EVO-3000BC |
| V | Sealed Bearing (only one needed) | EVO-3000SB |
Hub
EV-180 HUB
| DESCRIPTION | BDL PART NO. | |
| D | Inner Hub (parts below included with EV-180) | EV-180 |
| D1 | Step Washer & Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
Rear Basket
72-3EX REAR BASKET
| DESCRIPTION | PART NO. | |
| A | Rear Basket (includes all parts below when ordering 72-3EX) | 72-3EX |
| A1 | Starter ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |
Front Pulley and Insert
47-OFP FRONT PULLEY INSERT
| DESCRIPTION | PART NO. | |
| B | Front Pulley 47 Tooth 3 | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
 |
 |