EVO-13B-2
BDL’s new 2” open drive for baggers is now available for 2007-UP models. These kits are available in polished, clear anodize, chrome or black finish with contrast machined finish. We have incorporated a unique top belt guard into the system, which fits in a groove between the motor plate and side guard. BDL’s Patented Ball Bearing Lock Up Clutch is used along with a special pulley ratio that affords greater overall RPM management. The new drives are designed to allow proper replacement of the floorboards without any interference.
Click tab to view parts list.
EVO-13B-2 DRIVE KIT
| DESCRIPTION | PART NO. | |
| A | Rear Basket 69 Tooth 2" (see break down below) | B69-EV4 |
| B | Front Pulley 52 Tooth 2" Wide | B52F-2 |
| C | 132 Tooth 2" Wide Belt | BDL-132-2 |
| D | Clutch Hub (see break down below) | EV-180 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Ball Bearing Pressure Plate | BPP-100 |
| G | 3/4-16 Left Handed Hex Nut for Inner Hub | EVHN-500 |
| H | O-Ringed Adjusting Screw | AS-500 |
| L | Hardware Kit for EVO-13B-2 | HK-13 |
| M | Motor Plate for 2007-2010 FLT Models | MP-13-2 |
| Black | MP-13-2B | |
| Clear Anodize | MP-13-2CA | |
| Chrome | MP-13-2C | |
| MB | Motor Plate Bearing | MPB-2008 |
| N | Starter Housing | EV-13SH |
| Black | EV-13SHB | |
| Clear Anodize | EV-13SHCA | |
| Chrome | EV-13SHC | |
| O | Side Guard (used with EVO-11S-2 & EVO-13B) | EV-13SG |
| Black | EV-13SGB | |
| Clear Anodize | EV-13SGCA | |
| Chrome | EV-13SGC | |
| P | Dome Cover and Chrome Screws | EVRC-500 |
| Black | EVRC-500B | |
| Clear Anodize | EVRC-500CA | |
| Chrome | EVRC-500C | |
| R | Stand Off Kit for EVO-13S-2 | EV-13SO |
| Black | EV-13SOB | |
| Clear Anodize | EV-13SOCA | |
| Chrome | EV-13SOC | |
| S | Belt Guard for EVO-13B | EV-13BG |
HUB
EV-180
| DESCRIPTION | BDL PART NO. | |
| D | Inner Hub (parts below included with EV-180) | EV-180 |
| D1 | Step Washer & Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
REAR BASKET
69-EV2-4
| DESCRIPTION | PART NO. | |
| A | Rear Basket 69 Tooth 2" Basket (includes all parts below when ordering B69-EV4) | B69-EV4 |
| A1 | Ring Gear for 2006-up Drives | SG-4 |
| A2 | Drive Dogs | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
FRONT PULLEY AND INSERT
B52F-2
| DESCRIPTION | BDL PART NO. | |
| B | Front Pulley 52 Tooth 2" | B52F-2 |
 |
 |