EVO-12S
BDL’s EVO-12S is the work horse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and out perform the competition. Our one-piece 6061-T6 polished billet motor plate locks the transmission and engine together. All of these kits include a 3” wide belt drive unit with polished pressure plate, double row sealed main shaft bearing, polished aluminum side plate and pulley covers and a complete “BDL Clutch" with Kevlar® plates. For installation in wide frame/tire applications, choose the appropriate insert. For Dyna® Models from 1990 to 2006.
Click tab to view parts list.
EVO-12S DRIVE KIT
| DESCRIPTION | PART NO. | |
| A | Rear Basket (breakdown below) | 72-3E |
| B | 47 Tooth Front Pulley (breakdown below) | 47-OFP |
| C | 3 HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| G | Hub Nut with Seal | HNS-100 |
| H | Adjusting Screw & Nut | CDAS-100 |
| I | Shoulder Bolts Set of 9 | ESB-100 |
| J | Coil Springs | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware Kit for EVO-12S | HK-12 |
| M | Softail Motor Plate | MP-12 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | SH-9 |
| O | Side Plate | SP-9 |
| P | Dome covers | MD-100 |
| Q | Starter Pinion gear | PG-100 |
HUB
EV-180
| DESCRIPTION | BDL PART NO. | |
| D | Inner Hub (parts below included with EV-180) | EV-180 |
| D1 | Step Washer & Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
REAR BASKET
72-3E
| DESCRIPTION | BDL PART NO. | |
| A | Rear Basket (includes all parts below when ordering 72-3E) | 72-3E |
| A1 | Starter ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |
FRONT PULLEY AND INSERT
47-OFP
| DESCRIPTION | BDL PART NO. | |
| B | Front Pulley 47 Tooth 3" | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
 |
 |