EVB-3T-4
The EVB drive is one of our original closed primary belt drives designed for bolt in application. Our clutch basket features 12 cylindrical replaceable clutch dogs, which allows our clutch plates to maintain constant contact. Our Kevlar clutch plates give the maximum performance. The polished pressure plate uses nine shoulder bolts and springs so you can adjust your clutch pressure by simple removing or adding springs and shoulder bolts. This kit is for 1970-1983 rear chain 4-Speed Shovelhead models.
Click on tab to view parts list.
EVB-3T-4 DRIVE KIT
| DESCRIPTION | PART NO. | |
| A | 68 tooth kick only Rear Basket (breakdown below) | EV-460 |
| B | 45 Tooth Front Pulley | 45EVSH |
| C | 1 5/8 wide 138 tooth Kevlar belt | BDL-138-38K |
| D | Clutch Hub (breakdown below) | EV-160 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| I | Shoulder Bolts Set of 9 | ESB-100 |
| J | Coil Springs | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-2 |
| O | Outer belt guard | EOBG-1 |
HUB
EV-160
| DESCRIPTION | PART NO. | |
| D | Inner Hub (parts below included with EV-190) | EV-160 |
| D1 | C-Clip for Backside of Hub | CC-158 |
REAR BASKET
EV-460
| DESCRIPTION | PART NO. | |
| A | Rear Basket (includes all parts below when ordering EV-460) | EV-460 |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
 |
 |