EVB-2T
Softail 1986-89
The EVB drive is one of our original closed primary belt drives designed for a bolt -in application. Our clutch basket features twelve cylindrical replaceable clutch dogs which allows our clutch plates to maintain constant contact. Our Kevlar clutch plates give the maximum performance. The polished pressure plate uses nine shoulder bolts and springs so you can adjust your clutch pressure by simply removing or adding springs and shoulder bolts. We also include a sealed bearing for the inner primary for 1986-1989 Softail models.
Click on tab to view parts list.
EVB-2T DRIVE KIT
| DESCRIPTION | PART NO. | |
| A | 68 tooth kick only Rear Basket (breakdown below) | EV-475 |
| B | 45 Tooth Front Pulley (breakdown below) | 45-OFP |
| C | 1 5/8 wide 138 tooth Kevlar belt | BDL-138K |
| D | Clutch Hub | EV-170 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| G | Seal kit (Used with stock Adjusting screw & hub nut) | ESK-1 |
| H | Clutch Adjusting Screw & Nut | CDAS-100 |
| I | Shoulder Bolts Set of 9 | ESB-100 |
| J | Coil Springs | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Replacement inner primary bearing | EPB-100 |
| M | Primary seal | EPS-100 |
| O | Outer belt guard | EOBG-1 |
| P | Inner belt guard | EIBG-1 |
HUB
EV-170 HUB
| DESCRIPTION | PART NO. | |
| D | Inner Hub (parts below included with EV-170) | EV-170 |
| D1 | C-Clip | CC-158 |
REAR BASKET
EV-475
| DESCRIPTION | BDL PART NO. | |
| A | Rear Basket (includes all parts below when ordering EV-475) | EV-475 |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
FRONT PULLEY AND INSERT
45-OFP
| DESCRIPTION | PART NO. | |
| B | Front Pulley 45 Tooth | 45-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
 |
 |