EVB-2S
Softail 1990-93
The EVB drive is one of our original closed primary belt drives and is designed for bolt in application. Our clutch basket features 12 cylindrical replaceable clutch dogs, which allows our clutch plates to maintain constant contact. Our Kevlar clutch plates give the maximum performance. The polished pressure plate uses nine shoulder bolts and springs so you can adjust your clutch pressure by simply removing or adding springs and shoulder bolts. We also include a sealed bearing for the inner primary. Fits 1990-1993 Softail and Dyna.
Click tab to view parts list.
EVB-2S DRIVE KIT
| DESCRIPTION | PART NO. | |
| A | 68 tooth kick only Rear Basket (breakdown below) | EV-475 |
| B | 45 Tooth Front Pulley (breakdown below) | 45EV |
| C | 1-5/8" Wide 138 Tooth Kevlar Belt | BDL-138K |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (inc. fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| G | Hub Nut with Seal | HNS-100 |
| H | Adjusting Screw and Nut | CDAS-100 |
| I | Shoulder Bolts Set of 9 | ESB-100 |
| J | Coil Springs Set of 9 | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Replacement Inner Primary Bearing | EPP-100 |
| M | Primary Seal | EPS-100 |
| O | Outer Belt Guard | EOBG-1 |
| P | Inner Belt Guard | EIBG-1 |
REAR BASKET
EV-475 REAR BASKET
| DESCRIPTION | PART NO. | |
| A | Rear Basket (includes all parts below when ordering EV-475) | EV-475 |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
HUB
EV-180
| DESCRIPTION | PART NO. | |
| D | Inner Hub (parts below included with EV-180) | EV-180 |
| D1 | Step Washer & Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
FRONT PULLEY AND INSERT
45-OFP
| DESCRIPTION | PART NO. | |
| B | Front Pulley 45 Tooth 3” | 45-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
 |
 |