EVB-1S
For Rubbermount 1990-93
Closed belt drives for FXR & FLT rubbermount designed for a bolt-in application. Our clutch basket features 12 cylindrical replaceable clutch dogs, which allows our clutch steels to maintain constant contact. The polished pressure plate uses nine shoulder bolts and springs which allows simple installation. Our Kevlar clutch plates give maximum performance. We include a sealed bearing for the inner primary for 1990-1993 belt drives.
Click on tab to view parts list.
EVB-1S DRIVE KIT
| DESCRIPTION | PART NO. | |
| A | 68 tooth kick only Rear Basket (breakdown below) | EV-475 |
| B | 48 Tooth Front Pulley (includes IN-STD) | 48-EVB |
| C | 1 5/8 wide 130 tooth Kevlar belt | BDL-130K |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| G | Hub Nut with Seal | HNS-100 |
| H | Adjusting Screw & Nut | CDAS-100 |
| I | Shoulder Bolts Set of 9 | ESB-100 |
| J | Coil Springs | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Replacement Inner Primary Bearing | EPB-100 |
| M | Primary Seal | EPS-100 |
HUB
EV-180
| DESCRIPTION | PART NO. | |
| D | Inner Hub (parts below included with EV-180) | EV-180 |
| D1 | Step Washer & Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
REAR PULLEY
EV-475
| DESCRIPTION | PART NO. | |
| A | Rear Basket (includes all parts below when ordering EV-475) | EV-475 |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
FRONT PULLEY AND INSERT
48-EVB
| DESCRIPTION | PART NO. | |
| B | Front Pulley 48 Tooth | 48EVB |
| B1 | Standard Insert (hardware included | IN-STD |
 |
 |