pop up description layer
Home

REPLACEMENT PARTS FOR BOLT IN BELT DRIVES

Back to previous page
Next page
A 45EV Front pulley, Softail
A *45EVSH Front pulley, Shovelhead
A **48EVB Front pulley, FXR & 5-Speed Shovel
B EIBG-1 Inside Belt Guide for 45EV only
C EOBG-1 Outside Belt Guide for 45EV only
D FHN-2 Flat hex nut for spline engine shaft
E WA-2 Flat washer for spline engine shaft
* does not use inside belt guide
** does not use belt guides
A EV-475 Rear Basket, Softail, FXR & 5-Speed Shovel
A EV-460 Rear Basket, 4-Speed Shovel
Above baskets when ordered include starter gear, dogs
& bearing.
B EVRD-1 Round Dogs, Softail, FXR & 5-Speed Shovel (12)
B ESRD-1 Round Dogs, 4-Speed Shovel (12)
C EV-180 Splined Hub for 1990- Up 3” Open
& closed drives
C EV-170 Tapered Hub for 1986-89
C EV-160 Tapered Hub for 1965-83
C EV-190 Tapered Hub for EVO-10S & EVB-3TRB
D CC-244 C-Clip For Hub Bearing (Installed in Basket Above)
E EPB-100 Primary Bearing 1986-Up
F EPS-100 Primary Seal 1986-Up
G CC-134 C-Clip For Step Washer
H CC-158 C-Clip For Backside Of Hub
I ESW-1 Step Washer For EV-180 Hub Only
J HNS-100 Hub Nut With Seal 1990-Up Only
K EHB-100 Basket Hub Bearing
Above items used with all 3” open & closed drives
A EPP-100 Pressure Plate
B CDAS-100 Clutch Adjusting Rod For 1990-Up
C ESB-100 Shoulder Bolts (Set of 6)
D ECS-100 Clutch Springs (Set of 6)
BELTS FOR EVB BELT DRIVES
A ECP-100 Sided Kevlar Clutch Plates 2 needed
B ECP-200 Sided Kevlar Clutch Plates 4 needed
A BDL-138K (138 Tooth) Kevlar For Softail
B BDL-138-38K (138 Tooth) Kevlar For 4-Speed Shovelhead
C BDL-130K (130 Tooth) For FXR & 5-Speed Shovelhead
A EDP-200 Splined Clutch Steel
B ERDS-100 Clutch Steels For Rounds Dog Clutch
C EDP-100 Square Dog Clutch Steels (not pictured)